A sea sponge is a decorative paint tool used to create finishes with depth and movement. The sponge can be used on walls, furniture, picture frames, and accessories.
The types of colors you use and the order in which you apply them change the look of the finished design. If you choose three colors for a faux finish project, one of them should be the base coat color.
These will usually be the lightest colors, like soft cream. The other two colors should complement each other, such as two colors from the same color family, for example, pale green and medium green.
Here are the tips of How To Sponge Paint With 3 Colors:
1. Paint the Base Coat
- Cover the wall with the first color of your choice with a paint roller. This shade will show at least once it’s covered with other glazes, so pick a paint color that doesn’t overpower.
Read Also: Best Paint Sprayer
2. Sponging the second Color
- Mix equal parts polish and topcoat after the base coat is dry.
- Cover areas you do not want to clean with a sponge.
- Dampen a large sea sponge, drain it, and dip it into the frosting. Squeeze out any excess and use the loaded sponge to cut into the upper left corner of the wall.
- Continue patting it against the wall in a random pattern, working from the corner, top to bottom. The polish should be thick and textured, but it should not drip.
- The base coat color should still be visible.
3.Sponging the Third Color
- For a more faceted treatment, like the rusty steel look shown here, the sponge in a third color after the second one dries.
FAQS:
When sponge painting, what is the best way to do it?
Turn your hand in different directions as you go to show different sponge footprints. Let the paint dry. Mix third color with frosting in a separate bucket using 1 part paint
and 4 parts frosting. Dip a clean sea sponge in the third color and wipe off excess paint on a paper plate or towel.
How are sponge painting and marbling different?
The idea of this technique is that it is a very consistent and uniform finish. There is still a lot of sponge painting as a base for marbling. It is a very simple technique of sponge painting using your base color and your enamel color, the three colors you have; a medium tone, a low tone, and a high tone.
What is the best way to paint with a sponge paint tray?
1 Satin or semi-gloss paints allow a longer working time for enamel than matte or eggshell paint. 2 Pour the desired paint into a paint tray. 3 Apply with a 9-inch sponge paint roller cover with a 3/8-inch lint. 4 Let the base coat dry for 24 hours.
What is the drying time of sponge paint?
Satin or semi-gloss paints allow a longer working time for enamel than matte or eggshell paint. Pour the desired paint into a paint tray. Apply with a 9-inch sponge paint roller cover with a 3/8-inch fluff. Let the base coat dry for 24 hours. Mix the enamel in a ratio of one part paint to four parts enamel.
This article has been written by Bisma sheikh. She is an experience content writer with 4 years of experience. bismasheikh598@gmail.com